Now in Channel Island stock, this brand-new Beneteau Oceanis 37.1 is ready to provide years of happy cruising around the Channel Islands and further afield.
If you want to get into the sailing world, the Oceanis 37.1 is perfect for cutting your teeth, equally she is perfectly set up for the most experienced sailor.
Her specification includes:
Base boat to standard specification.
Yanmar 40hp engine on shaft drive.
Deep cast iron keel.
3 Cabins & 1 heads – with Walnut woodwork.
Winner Silver 139 Upholstery in the saloon.
FAMILY TRIM LEVEL:
Teak like decking – Iro-Deck slatted aft platform
Teak like helm seats – Iro-Deck slatted helm seats
Hot/cold water cockpit shower
Galley: Compact sink cover with cutting board
Hifi Fusion RA210 + Interior loudspeakers & Waterproof exterior
speakers.
Dual USB socket: in the saloon (x 1), in the forward cabin (x 1), in
the aft cabins (x 1), Starboard helm-station (x 1)
Full 230 V system (5 Inside sockets, 1 Shore power socket)
40 Amperes battery charger, IBS sensor, Navicolor 3”5 screen
1 AGM amperes additional service battery (95Ah)
Mosquito nets for opening portholes
Saloon: LED indirect lighting
Galley: Stainless steel 2 burner oven/grill cooker on gimbal (in lieu
of standard)
Bottle storage underfloor
1 000 W Electric windlass (Remote control)
Aft transom protection
Bow stainless steel protection
“Luxe” polyester drop-leaf cockpit table
Outboard engine bracket
Double berth in saloon
Galley: Sea water foot pump with cool box draining function
Saloon & Cabins: Fans
IN-MAST FURLING PACK
(The standard Dacron C-breeze self-tacking jib is retained)
– Anodised aluminium 9/10th in-mast furler (Z-Diffusion), 2 sets of
spreader bars
– High strength Dacron C-breeze cross-cut mainsail
UPWIND AND DOWNWIND PACK
Starboard manual (H35.2 STA) rigging winch to replace the winch feeder
+ 1 Cadet Grey halyard bag
Polyester bowsprit with integrated anchoring gear and bobstay (for
Code 0 and asymmetric spinnaker)
Asymmetrical spinnaker rigging / Code 0 (sheets, Blocks, Halyards)
Additional jammers (on the roof for the halyard or on the coaming
for the Genoa sheet, depending on the pack)
Rigging run back to cockpit (except boom topping lift)
2 Manual (H40.2 STA) genoa sheet winches + Aluminum “Speed Grip”
winch handle + Winch handle box
Genoa sheet tracks on roof with traveller (pulls back the traveller on
the self-trimming jib rail)
Genoa sheet on furler, high strength Dacron C-breeze (to replace the
standard self-tacking jib)
OFFSHORE PACK – RAYMARINE
1 x i70s display at port side helm station
DST810 Sensor (Log, Speedometer, Temperature)
Wind Sensor (Windvane, Anenometer)
Windex Windvane
Starboard helmstation:
– 1 x Steering console
– 1 x 7” Axiom + multi-function touchscreen (GPS, Chart plotter, Card
reader – Navionics®+ Blank cartography included)
– 1 x Console cover, Cadet Grey
P70s autopilot + control (to port)
Chart table: RAY73 VHF, AIS receiver function.
Aft fair leads
Port and Starboard openings in side rails.
Bow thruster
Front opening for icebox.
Electric quiet flush toilet – stbd aft – salt water.
White hull
PDI & Commisioning inc Antifoul.